Back to cranes
Giant 4548 Tendo HD
A compact, multi-functional jack of all trades
GIANT’s TENDO-Series range is one of the most compact and versatile machines it offers, designed to manoeuvre in tight spaces and on rough terrains, while its extendable lifting arm can reach an astonishing height of 4.8m. As a standard model, the TENDO is equipped with a proportional load moment protection – combining safety with optimum performance. This GIANT 4548 TENDO HD is powered with a 45hp engine and offers many optional attachments including forks, loading bucket and man basket.
Specification
General
| Engine | Kubota V1505-T 4 cylinder 45hp / 33kW |
|---|---|
| Service weight | 2.950kg |
| Drive hydraulics | Hydrostatic automotive HD (Heavy duty) |
| Driving speed | 0-10km/h / 0-25km/h |
| Standard tires | 10.0/75-15.3 AS (160cm machine) width) |
| Quick change | GIANT STANDARD Hydraulic |
| Lifting capacity | 1.400kg |
| Lifting height | 4,800mm |
| Fuel | Diesel |
Tipping loads
| With counter weight | |
|---|---|
| Tipping load (kg) | A:2.115, B:1.420, C:1.090, D:550, E:460 |
| Lifting capacity (kg) | A:2.870, B:1.925, C:1.445, D:855, E:710 |
Steering
| Two-wheel steering | Makes it possible to drive steady and steer accurately. |
|---|---|
| Four-wheel steering | Very manoeuvrable in smaller areas due to the small turning radius. |
| Crab steer | Easy to drive closely to the wall. |
Dimensions
| Wheelbase | 1,997mm |
|---|---|
| Total length (without bucket) | 3,150mm |
| Total length (with bucket) | 3,850mm |
| Length 3-point lifting arm | 540mm |
| Min. height 3-point hitch | 253mm |
| Max. height 3-point hitch | 652mm |
| Seat top height | 950mm |
| Max. height with ROPS/FOPS cabin | 1,970mm |
| Height frontframe | 1,270mm |
| Dumping height | 4,100mm |
| Max. height pivot | 4,800mm |
| Max. height with bucket | 5,500mm |
| Rollback angle (on the ground) | 45° |
| Rollback angle (on the ground) | 45° |
| Rollback angle at max. lifting height | 51° |
| Dumping angle (max.) | 33° |
| Loading angle (max.) | 30° |
| Maximum radius external | 3,400mm |
| Radius at the outer edge | 2,700mm |
| Inside turning radius | 1,200mm |
| Min. machine width | 1,570mm |
